SECTION 702 MANHOLES, JUNCTION BOXES & CATCH BASINS
MATERIAL |
REFERENCE |
PURPOSE | SAMPLED BY |
MINIMUM FREQUENCY |
MIN. QUANTITY |
CERT. |
REMARKS |
|
TESTED BY |
METHOD |
CONTAINER |
DISTR. |
|||||
FOR DETAILS ON CONCRETE TESTS, MIX DESIGNS AND MATERIALS (ADMIXTURES, AGGREGATES, CEMENT AND WATER) SEE SECTION 901 OF THIS MANUAL. |
||||||||
| ASPHALTIC VARNISH | 702.02 1008.03 Mat. Lab |
Accept. | Proj. Engr. S 601 |
1/batch | 1 L Friction top can |
---- |
||
| BACKFILL | Density | 702.04 701.08(c)(1) Proj. Engr. |
Accept. | ------ |
------ |
------ |
---- |
See Section 701 of this manual. |
| Granular Material | 702.04 701.08(c)(1) Dist. Lab |
Accept. | ------ |
------ |
------ |
---- |
See Section 701 of this manual. | |
| Soil | 702.04 701.08(c)(1) Dist. Lab |
Accept. | ------ |
------ |
------ |
---- |
See Section 701 of this manual. | |
| BRICK | Sewer | 702.02 1004.01 Mat. Lab |
Accept. | Proj. Engr. S 601 |
1/25,000/type* | 5 bricks | ---- |
*Visual inspection by Proj. Engr. Sample only if questionable. |
| COVERS, FRAMES, & GRATES | 702.02 1018.04 Const. Fab. Insp. |
Accept. | Inspected, approved and stamped by Const. Fab. Insp. prior to use. See Section 807 of this manual. | CA 6 |
Visual inspection by Proj. Engr. Proj. Engr. to receive Form 4148 (Certificate of Cast Iron Covers, Grates, etc.) from Const. Fab. Insp. | |||
| GASKET MATERIALS | Flexible Plastic Gasket | 702.04 1006.06(b) Mat. Lab |
Accept. | Inspected and approved by Const. Fab. Insp. prior to use. See Section 701 of this manual. | ---- |
(QPL 4) Gasket test report lab no. listed on precast unit CD. |
||
| GEOTEXTILE FABRIC | 702.02 1019.01 Mat. Lab |
Prelim. Source Approval |
Dist. Lab S 614 |
1/type/lot/source/
shipment |
1 m/roll width of fabric* | ----- | *Sample a minimum of 2 m2. | |
| 702.02 1019.01 Mat. Lab |
Accept. | Proj. Engr. S 601 |
1/type/source/shipment | 1 m/roll width of fabric* | ---- |
(QPL 61) *Sample a minimum of 2 m2. |
||
| JOINT FILLER | 702.04 1005.01(c) Mat. Lab |
Accept. | ------ |
------ |
------ |
---- |
See Section 601 & Section 805 of this manual. |
|
| METAL WORK PAINT | 702.02 1008.05 Mat. Lab |
Accept. | Proj. Engr. S 601 |
1/batch | 1 L Friction top can |
---- |
||
| MORTAR | Cement, Sand, & Water | 702.02 Proj. Engr. |
Accept. | ------ |
------ |
------ |
---- |
Visual inspection by Proj. Engr. Sample only if questionable. |
| PRECAST REINFORCED CONCRETE UNITS | 702.02 1016 Const. Fab. Insp. |
Accept. | Inspected, approved and stamped by Const. Fab. Unit prior to use. See Section 805 of this manual. | CD 1 & 6 |
Visual inspection by Proj. Engr. CD includes test report no. for gasket materials. | |||
| REINFORCEMENT | Bars | 702.02 1009 Mat. Lab* |
Accept. | Proj. Engr. or Const. Fab. Insp. S 501 |
1/size/grade/ 75 Mg/ source** |
1.2 m length | ---- |
*Dist. Lab in Dist.
02. **If listed on QPL 71, material with a CA (Distr. 1) need not be sampled. Sample for verification if questionable. |
| Chairs | 702.04 805 806.06 Mat. Lab |
Accept. | Proj. Engr. S 501 |
1/type* | 1 chair | ---- |
*Visual inspection by Proj. Engr. Sample only if questionable. Chairs with plastic coated tips need not be sampled. | |
| Wire Fabric | 702.02 702.04 1009.01(e) Mat. Lab |
Accept. | Proj. Engr.* S 501 |
1/shipment | 1.2 m x 1.2 m | ---- |
*Sampled by Const. Fab. Insp. for precast items. | |